Smart Lithium Battery Bluetooth Function 12V 24Ah for UPS,LED light
1. Smart Lithium Battery 12V 24Ah Specification
|4||Series application||Not allowed|
|6||Operation temperature range @charging||0~45℃|
|7||Standard charge voltage||14.6±0.1V|
|8||Float charge voltage(for Standby use)||13.9±0.1V|
|9||Allowed MAX charge current||20A|
|10||Recommended charge current||≤10A|
|12||Output Voltage Range||8.0~14.6V|
|13||Allowed MAX discharge current||24A|
|14||Pulse discharge current||55A withstand 3s|
|15||Discharge Cut-off voltage||8.0V|
|18||Storage Temperature & Humidity Range||Short: within 1 month||-20~35℃, 45~75%RH|
|Long term: above 1 month||10~30℃, 45~75%RH|
|19||Self-discharge rate||Residual capacity||≤3% per month; ≤15% per year|
|Reversible capacity||≤1.5%per month; ≤8% per year|
2. Smart Lithium Battery 12V 20Ah Dimension
3. Electrical Characteristics & Test Condition
@Testing Conditions: Ambient Temperature: 25±5℃; Huminity:45%~75%.
|1||Internal Impedance||≤50mΩ||Test the internal resistance of 50% SOC battery pack with 1 kHz AC
internal resistance test instrument.|
|2||Capacity||≥24Ah||Rest for 1 hour after fully charged, then discharge with 0.33C
current until the battery reaches the discharge cutoff voltage.
Repeat above process for three times, if the discharge time is not
less than 180 minutes, you can stop and define the Discharging
current*time value (Ah) as battery capacity.|
Short circuit protection
|Automatically cutoff discharging when short circuit, and release
after remove the lead.||Connect the positive and negative of this battery pack through a
lead with the resistance less than 5mΩ.|
|4||MAX charge Current||20A||Charging with this current for more than 0.5h and the added
temperature of battery pack less than 20℃.|
|5||MAX discharge Current||30A||Discharging with this current for more than 0.5h and the added
temperature of battery pack less than 35℃.|
Cycle life (DOD%100)
|≥2000cycle||Discharge with the current of 0.5C until it can’t discharge, and
then rest it for 1h. Charge the battery following
CC(0.33C)/CV(14.6V) mode to full capacity, and then rest it for 1h.
Repeat above process until full charged capacity is no more than
80% of normal value. Accumulated times is defined as cycle life.|
|-20℃||≥70%||At 25±5℃ discharge the battery with the current of 0.33C to the
cut-off voltage. Store the battery at various temperatures for 2h
and discharge the battery with 0.33C to the cut-off voltage. Record
the ratio between discharging & charging capacity.|
|8||Charge Retention ability||remain capacity≥90%||Charge the battery to full capacity and store it for 28days, and
then discharge it with 0.33C to the cut-off voltage.|
4. Product advantage
A. Extremely safe and stable chemistry: PCB and/or BMS built inside
to balance protect the battery.
B. Long life-cycle: Can be circularly used, best can up to 2000
times recycles, 8 times of Lead acid battery.
C. Lighter weight, with the best power-to-weight ratio: 1/3 of Lead
acid battery weight.
D. Good performance at high temperature and high temperature
E. Low self-discharge rate, less than 3% monthly.
F. No memory effects and highly efficient charge.
G. Environment friendly: Clean and Green energy poses no pollution
on our environment.
5. Bluetooth Function
· 1. Energy Storage System
· 2. Starter Battery
· 3. RV Camper/Caraven Battery
· 4. UPS Storage Battery
· 5. Forklift Battery
· 6. Golf Trolley/Cart Battery